# Refill card stacker ### 1. Remove cards from the recycle bin - Remove new cards from the **recycle bin** and prepare them for loading. - Make sure the cards are **aligned and clean**. --- ### 2. Remove the card stacker box - Locate the **release switch** on the **side of the card stacker box**. - Pull the release switch. - **Lift the box upward** to remove it from the stacker. --- ### 3. Load cards into the box - Inside the box, locate the **metal spring-loaded slider** (card pressure plate). - **Lift the metal slider upward**. - Place the cards **under the slider**, making sure they are stacked evenly. - Slowly release the slider so it rests **on top of the cards**, applying pressure. > ⚠️ Important: The metal slider must always be on top of the cards to ensure proper feeding. --- ### 4. Reinsert the box into the stacker - Insert the box back into the card stacker. - **Check the direction label** on the top of the box and ensure it is oriented correctly. - Push the box down until it **locks firmly into place**. --- ### 5. Final check - Gently pull on the box to confirm it is **securely locked**. - The card stacker is now ready for operation.