Replacing the Timer Battery in the Kiosk

Required Tools

• Screwdriver

• Wrench or socket tool (for loosening the nuts, size depends on model)

• 4 × AA batteries (new)

1. Disconnect power

• Unplug the kiosk from the power outlet to ensure it is completely powered off.

2. Remove the cover

• Use a wrench or socket tool to loosen and remove the 4 nuts.

• Remove the cover carefully.

3. Loosen the timer (if required)

• If the timer is mounted tightly:

  • Slightly loosen the 2 nuts on the left and right side of the timer using the wrench or socket tool.

  • Do not remove them completely.

4. Remove the timer from the DIN rail

• On the bottom side of the timer, locate the red release knob / lever.

• Use a screwdriver to push it downward.

• Pull the timer forward to remove it from the DIN rail.

5. Replace the batteries

• On the back side of the timer:

  • Replace the 4 AA batteries.

  • Make sure the polarity (+ / –) is correct.

6. Reinstall the timer

• Mount the timer back onto the DIN rail and press it firmly into place.

• Tighten the previously loosened nuts using the wrench or socket tool.

7. Check connections

• Before reinstalling the cover:

  • Check all connectors and terminals.

  • If any connectors are loose, gently tighten them with a screwdriver.

8. Reinstall the cover

• Put the cover back on and secure it with the 4 nuts.

9. Power on and set mode

• Plug the kiosk back into the power outlet.

• Set the timer switch from AUTO / MANU to ON.