Refill card stacker

1. Remove cards from the recycle bin

• Remove new cards from the recycle bin and prepare them for loading.

• Make sure the cards are aligned and clean.

2. Remove the card stacker box

• Locate the release switch on the side of the card stacker box.

• Pull the release switch.

• Lift the box upward to remove it from the stacker.

3. Load cards into the box

• Inside the box, locate the metal spring-loaded slider (card pressure plate).

• Lift the metal slider upward.

• Place the cards under the slider, making sure they are stacked evenly.

• Slowly release the slider so it rests on top of the cards, applying pressure.

⚠️ Important: The metal slider must always be on top of the cards to ensure proper feeding.

4. Reinsert the box into the stacker

• Insert the box back into the card stacker.

• Check the direction label on the top of the box and ensure it is oriented correctly.

• Push the box down until it locks firmly into place.

5. Final check

• Gently pull on the box to confirm it is securely locked.

• The card stacker is now ready for operation.