Skip to main content

Replacing the Timer Battery in the Kiosk

Required Tools

  • Screwdriver

  • Wrench or socket tool (for loosening the nuts, size depends on model)

  • 4 × AA batteries (new)

1. Disconnect power

  • Unplug the kiosk from the power outlet to ensure it is completely powered off.

2. Remove the cover

  • Use a wrench or socket tool to loosen and remove the 4 nuts.

  • Remove the cover carefully.

3. Loosen the timer (if required)

  • If the timer is mounted tightly:

    • Slightly loosen the 2 nuts on the left and right side of the timer using the wrench or socket tool.

    • Do not remove them completely.

4. Remove the timer from the DIN rail

  • On the bottom side of the timer, locate the red release knob / lever.

  • Use a screwdriver to push it downward.

  • Pull the timer forward to remove it from the DIN rail.

5. Replace the batteries

  • On the back side of the timer:

    • Replace the 4 AA batteries.

    • Make sure the polarity (+ / –) is correct.

6. Reinstall the timer

  • Mount the timer back onto the DIN rail and press it firmly into place.

  • Tighten the previously loosened nuts using the wrench or socket tool.

7. Check connections

  • Before reinstalling the cover:

    • Check all connectors and terminals.

    • If any connectors are loose, gently tighten them with a screwdriver.

8. Reinstall the cover

  • Put the cover back on and secure it with the 4 nuts.

9. Power on and set mode

  • Plug the kiosk back into the power outlet.

  • Set the timer switch from AUTO / MANU to ON.

Back to top